mupif.org

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Example of multiscale heat transfer ======
{{ :wiki:images:mupif-logo.png?nolink&100|}}

This example demonstrates a multiscale approach for solving stationary heat transfer on a perforated ceramic sheet. Due to a periodic sheet structure, it is advantageous to separate two scales:
  * **Macroscale** - the ceramic sheet has dimensions 400 x 200 mm and contains circular holes, see figure below. Heat transfer model simplifies such a heterogeneous morphology to a homogeneous continuum using an effective conductivity coming from a microscale.
  * **Microscale** - a representative volume element (RVE) captures morphology of ceramic sheet with a circular hole. RVE size is 2 x 2 mm. Effective conductivity of RVE is determined.

{{ :wiki:examples:scheme1.png?nolink&600 | Micro and macroscale problem}}


Microscale simulation considers RVE with a temperature gradient in //x// direction, assigning 0<sup>o</sup>C to the left edge and 1<sup>o</sup>C to the right edge. Solution of heat balance equation via finite elements provides temperature field on figure below. The RVE uses a regular structured mesh of 40 x 40 quadrilateral elements which yields 1599 equations for unknown temperature field. Heat conductivity is assigned as 1.0 W/m/K for solid elements. The effective conductivity is obtained by calculating heat flow on the right edge and from assigned boundary temperatures. The effective conductivity yields 0.314 W/m/K from the RVE and computation time is about 2.0 s.

{{ :wiki:examples:micro-t_mesh.png?nolink&400 | Temperature field on a microscale loaded with temperature gradient}}


Effective conductivity from the microscale is passed to the macroscale. Macroscale has dimensions 400 x 200 mm and is discretized into 40 x 20 finite elements, yielding 840 equations for unknown temperature field. Solution time is about 1.0 s. Figure below shows discretization and the resulting temperature field.

{{ :wiki:examples:macro-t_mesh.png?nolink&400 | Temperature field on a macroscale with assigned boundary conditions}}


The MuPIF control script for this simulation is showed below. It can be also found under examples/Example12/Demo12.py on MuPIF installation.

<code python>
import sys
sys.path.append('../../..')
from mupif import *
from mupif import logger
#Import module Example10/demoapp.py
sys.path.append('../Example10')
import demoapp

#Read geometry and boundary condition for the microscale
thermalMicro = demoapp.thermal('thermalMicro.in','')
logger.info(thermalMicro.getApplicationSignature())
#Solve the microscale problem
thermalMicro.solveStep(None)
#Get effective conductivity from the microscale
effConductivity = thermalMicro.getProperty(PropertyID.PID_effective_conductivity,0.0)
logger.info('Computed effective conductivity from microscale: %f' % effConductivity.value)

#Dump microscale results to VTK files
thermalMicroField = thermalMicro.getField(FieldID.FID_Material_number, 0.0)
thermalMicroField.field2VTKData().tofile('thermalMicroMaterial')
thermalMicroField = thermalMicro.getField(FieldID.FID_Temperature, 0.0)
thermalMicroField.field2VTKData().tofile('thermalMicroT')

#Read geometry and boundary condition for the macroscale
thermalMacro = demoapp.thermal('thermalMacro.in','')
#Assign effective conductivity for the whole macroscale domain
thermalMacro.setProperty(effConductivity)
thermalMacro.solveStep(None)
thermalMacroField = thermalMacro.getField(FieldID.FID_Temperature, 0.0)

#Dump macroscale results to VTK files
thermalMacroField.field2VTKData().tofile('thermalMacroT')
</code>
mupif.org

User Tools

Site Tools

Page Tools
