MediaWiki API result

This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.

Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.

See the complete documentation, or the API help for more information.

{
    "batchcomplete": "",
    "continue": {
        "gapcontinue": "Seznam_skript",
        "continue": "gapcontinue||"
    },
    "warnings": {
        "main": {
            "*": "Subscribe to the mediawiki-api-announce mailing list at <https://lists.wikimedia.org/postorius/lists/mediawiki-api-announce.lists.wikimedia.org/> for notice of API deprecations and breaking changes."
        },
        "revisions": {
            "*": "Because \"rvslots\" was not specified, a legacy format has been used for the output. This format is deprecated, and in the future the new format will always be used."
        }
    },
    "query": {
        "pages": {
            "542": {
                "pageid": 542,
                "ns": 0,
                "title": "Semi-analytical approaches to vibrations induced by moving loads",
                "revisions": [
                    {
                        "contentformat": "text/x-wiki",
                        "contentmodel": "wikitext",
                        "*": "=== Semi-analytical approaches to vibrations induced by moving loads ===\n\n==== Zuzana Dimitrovov\u00e1, Departamento de Engenharia Civil, Faculdade de Ci\u00eancias e Tecnologia, Universidade Nova de Lisboa and IDMEC, Instituto Superior T\u00e9cnico, Universidade de Lisboa, Lisboa, Portugal====\n\n'''Room B-366, [https://goo.gl/maps/9fgUfCGjn2k Faculty of Civil Engineering, CTU in Prague]''' \n\n'''Tuesday, 25 June 2019, 15:00-16:00''' \n\nWith the evolution of the computational power, there is a tendency to overlook analytical and semi-analytical solutions, despite their inherent advantages. One should, however, be aware of the fact, that these solutions provide the necessary insight into the relevant physical phenomena that are accompanied by quick and highly precise results. With the help of dimensionless parameters one can understand general tendencies for a specific group of possible combination of real parameters, and, as the physical model usually requires substantial simplifications, this also means that the results obtained are reduced to essential ones that can be simply analysed. \n\nThe objective of this presentation is to fill the gap in available semi-analytical solutions related to wave propagation induced by moving loads, with practical applications of high-speed rails. Two important aspects will be dealt with: the critical velocity and the instability of the moving system. The structures that will be considered are composed of a beam and a supporting medium. The beam will be simplified in conformity with the Euler-Bernoulli theory. The supporting structure will be considered as two-parameter viscoelastic foundation that will gradually increase its complexity via finite depth viscoelastic continuum without shear resistance, with partial shear resistance up to the full two-dimensional plane strain model. The moving object will contemplate a moving force as well as a moving mass and one- or two-mass oscillators.\n\nSolution methods are based on moving coordinates, Laplace and Fourier transforms, and methods of contour integration. New closed-form formulas are presented for the critical velocity and for the full beam deflection shapes respecting the influence of non-homogeneous initial conditions. Proximity of moving objects is also analysed. Presentation is based on the following publications and includes also new results, so far published only in conference proceedings.\n\n'''References''' <br>\n# Z. Dimitrovov\u00e1, \u201cSemi-analytical approaches to vibrations induced by moving loads with the focus on the critical velocity and instability of the moving system\u201d, Chapter 4 in Ground Vibration from High Speed Railways, V.V. Krylov (Ed), ICE Publishing, Thomas Telford Ltd. (in press)\n# Z. Dimitrovov\u00e1, \u201cSemi-analytical solution for a problem of a uniformly moving oscillator on an infinite beam on a two-parameter visco-elastic foundation\u201d, Journal of Sound and Vibration (JSV), 438, pp. 257-290, 2019.\n# Z. Dimitrovov\u00e1, \u201cComplete semi-analytical solution for a uniformly moving mass on a beam on a two-parameter visco-elastic foundation with non-homogeneous initial conditions\u201d, International Journal of Mechanical Sciences (IJMS), 144, pp. 283-311, 2018.\n# Z. Dimitrovov\u00e1, \u201cAnalysis of the critical velocity of a load moving on a beam supported by a finite depth foundation\u201d, International Journal of Solids and Structures (IJSS), 122\u2013123, pp. 128-147, September 2017."
                    }
                ]
            },
            "12": {
                "pageid": 12,
                "ns": 0,
                "title": "Seminar of the Department of Mechanics",
                "revisions": [
                    {
                        "contentformat": "text/x-wiki",
                        "contentmodel": "wikitext",
                        "*": "Seminars of the Department of Mechanics take place on an irregular basis in the department conference room B366 or in Dean's conference room (both in building B of the Faculty of Civil Engineering, Th\u00e1kurova 7, Prague 6).\n*10.5.12 10:30 B366 \n:Mija H. Hubler (Northwestern University): [[abstract_Hubler|Insights for creep and shrinkage models from bridge deflections]]\n*17.5.12 15:00 B366 \n:[http://staff.utia.cas.cz/kruzik/ Martin Kru\u017e\u00edk] (Department of Physics FCE CTU // Institute of Information Theory and Automation AS CR): title to be announced\n*31.5.12 10:00 B366 \n:[http://ksm.fsv.cvut.cz/~zemanj/ Jan Zeman] (Department of Mechanics FCE CTU): [[abstract_Zeman|Modeling random heterogeneous materials by Wang tilings]]\nPrevious seminars can be found below.\n== 2012 ==\n*[http://www.ipm.cz/low-cycle-fatigue-group-peoples-prof-mgr-tomas-kruml-csc.html Tom\u00e1\u0161 Kruml] (Institute of Physics of Materials AS CR, Brno, Czech Republic): Typick\u00e9 i atypick\u00e9 pracovn\u00ed diagramy plasticky deformovateln\u00fdch materi\u00e1l\u016f (lecture in Czech)\n*Christian Artelt (HeidelbergCement AG, Germany): Core business and key activities in the field of R&D\n*Benny Suryanto (University of Tokyo, Japan): [[abstract_Suryanto|Experimental investigation and characterization of time-dependent and fatigue behavior of engineered cementitious composites (ECC)]]\n== 2011 ==\n*[http://www.ltm.uni-erlangen.de/lehrstuhl/mitarbeiter/personal.shtml/paul-steinmann.shtml Paul Steinmann] (Universit\u00e4t Erlangen-N\u00fcrnberg, Germany): [[abstract_Steinmann|On regularized node-based shape optimization]]\n*Albert G. Nasibulin (Aalto University - Helsinki University of Technology, Finland): Aerosol synthesis of single-walled carbon nanotube\n*Ahmad A. Hamid (Drexel University, USA): Evaluation and retrofit of heritage masonry structures\n== 2010 ==\n== 2009 ==\n== 2008 ==\n== 2007 ==\n== 2006 ==\n== 2005 ==\n== 2004 ==\n* Rostislav Chudoba: Numerick\u00e9 modelov\u00e1n\u00ed textiln\u00edho betonu na mikro-, mezo- a makroskopick\u00e9 \u00farovni"
                    }
                ]
            }
        }
    }
}