České vysoké učení technické
Fakulta stavební

Katedra mechaniky K132

CTU logo

Czech    English
Katedra
Věda a výzkum
Výuka
Ostatní
Vyhledávání

Publikace 2017

** probiha hledani a vyber.. dokonceno za 16.8 s **

<< zpět

  • Micronized recycled concrete as an alternative binder/active filler for stabilized and cold recycled mixtures

    • Čížková, Z. - Šedina, J. - Valentin, J. - Tesárek, P., - Karra´a, G.
    In: IRF Middle East & North Africa Regional Congress & Exhibition - Technical & Scientific Papers. Paris: IRF (International Road Federation), 2017. p. 620-630.
    2017
  • CATHIONIC CORROSION INHIBITORS FOR PROTECTION OF STEEL IN CHLORIDE CONTAMINATED CONCRETE

    • Lovasi, T. - Msallamova, S. - Kouril, M. - Jamborova, T. - Stoulil, J. - Němeček, J., - Šulc, R.
    In: METAL 2017 Conference Proceedings. Ostrava: Tanger Ltd., 2017. p. 1361-1366. 1st Edition. ISBN 978-80-87294-79-6.
    2017
  • Modely pro hodnocení rizika poruch vlivem interakce dopravních a okolních staveb

    • Šejnoha, J. - Janda, T.
    [Software] 2017.
    2017
  • Thermo-mechanical simulations of early-age concrete cracking with durability predictions

    • Havlásek, P. - Šmilauer, V. - Jandová, K., - Baquerizo, L.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. p. 1-7. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-899X.
    2017
  • Dry Separation of Brown Coal Fly Ash, Determination of Properties of Separated Parts, and Their Application in High Volume Cementitious Pastes

    • Haider, U. - Bittnar, Z. - Ali, A. - Kopecký, L. - Šmilauer, V. - Bittnar, P., - Pokorný, J.
    Periodica Polytechnica-Civil Engineering. 2017, 61(3), 590-601. ISSN 0553-6626.
    2017
  • Analysis of Tensile Strength in Bending of Plasterboard with Use of Optical Correlation

    • Zobal, O. - Litoš, J., - Antoš, J.
    In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 459-463. ISBN 978-80-553-3167-6.
    2017
  • Modeling thermomechanical damage mechanisms of concrete

    • Pohl, C. - Unger, J.F.
    In: Coupled Problems in Science and Engineering VII. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017. ISBN 978-84-946909-2-1.
    2017
  • Obtaining macroscopic properties from a mesoscale thermomechanical model of concrete

    • Pohl, C. - Unger, J.F.
    In: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany. Stuttgart: Universitaet Stuttgart, 2017.
    2017
  • Experimental and numerical analysis of tensile properties of textile reinforced concrete with steel fibres

    • Machovec, J. - Vogel, F. - Linforth, S., - Konvalinka, P.
    In: Key Engineering Materials. Durnten-Zurich: Trans Tech Publications Ltd, 2017. p. 275-280. ISSN 1013-9826. ISBN 9783035710793.
    2017
  • The Occurrence of Synchronized Jumping Crowd at Sports Stadiums

    • Verner, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 152-156. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Wang Tiles Local Tilings Created by Merging Edge-compatible Finite Element Meshes

    • Zrůbek, L. - Kučerová, A., - Doškář, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 162-165. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Micromechanical quantities based on Wang tiles with local tilings

    • Zrůbek, L. - Kučerová, A., - Doškář, M.
    In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. p. 159-160. ISBN 978-80-261-0748-4.
    2017
  • DRYING CHARACTERISTIC OF RAMMED EARTH WITH ILLITIC-KAOLINITIC CLAY CONTENT

    • Otcovská, T. - Mužíková, B., - Padevět, P.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 89-92. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • PORUCHY STAVEB Z NEPÁLENÉ HLÍNY PŘI ZVÝŠENÉ HLADINĚ VODY A LABORATORNÍ TESTOVÁNÍ ODOLNOSTI NEPÁLENÉ HLÍNY VE VODĚ

    • Mužíková, B. - Otcovská, T., - Padevět, P.
    In: Proceedings of 15th International Conference on New Trends in Statics and Dynamics of Buildings. Bratislava: Slovak University of Technology in Bratislava, 2017. p. 9-14. ISBN 978-80-227-4732-5.
    2017
  • Využití povrchově modifikovaných polymerních a skleněných mikro-vláken jako výztuž v cementových kompozitních materiálech

    • Trejbal, J. - Prošek, Z. - Fládr, J., - Tesárek, P.
    In: 14. konference Speciální betony 2017. Praha: Sekurkon, 2017. p. 11-17. ISBN 978-80-86604-73-2.
    2017
  • Modeling Chloride Migration in Reinforced Concrete

    • Němeček, J. - Kruis, J. - Koudelka, T., - Němečková, J.
    In: ICCES 2017 International Conference on Computational & Experimental Engineering and Science. Coimbra: ITeCons - Institute for Research and Technological Dev. in Construction Sciences, 2017. p. 1-6.
    2017
  • Microstructure and Micromechanical Properties of Mg Microtubes Prepared by Laser Dieless Drawing

    • Jäger, A. - Tesař, K. - Němeček, J. - Minenin, A., - Němeček, J.
    In: Book of Abstracts - LMP 2017. Košice: IMR SAS, 2017. pp. 24-25.
    2017
  • Fracture Properties of Cement Studied by Nanoindentation and FIB

    • Němeček, J. - Němeček, J., - Maňák, J.
    In: Book of Abstracts - LMP 2017. Košice: IMR SAS, 2017. pp. 10.
    2017
  • VARIATIONALLY-BASED EFFECTIVE DYNAMIC THICKNESS FOR LAMINATED GLASS BEAMS

    • Schmidt, J. - Zemanová, A. - Janda, T. - Zeman, J., - Šejnoha, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 109-114. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Suchá prefabrikovaná směs multifunkčního silikátového kompozitu

    • Kolář, K. - Bažantová, Z., - Konvalinka, P.
    Czech Republic. Patent CZ 306663. 2017-03-15.
    2017
  • Interfacial shear strength enhancement of polymeric macro-fibers via plasma treatment

    • Prošek, Z. - Trejbal, J. - Tesárek, P., - Kopecký, L.
    Advanced Materials Proceedings. 2017, 2(12), 789-792. ISSN 2002-4428.
    2017
  • Methodology for Measuring the Shear Stress of Plasterboards

    • Zobal, O. - Jára, R., - Hataj, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 157-161. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Evaluation of Micromechanical Properties of Carbon Fiber Fabric Using Nanoindetation

    • Klapálek, P. - Prošek, Z. - Jíra, A., - Melzerová, L.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 66-70. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Flutter and galloping of cable-supported bridges with porous wind barriers

    • Buljac, A. - Kozmar, H. - Pospíšil, S., - Macháček, M.
    Journal of Wind Engineering and Industrial Aerodynamics. 2017, 2017(171), 304-318. ISSN 0167-6105.
    2017
  • NUMERICAL ANALYSIS OF RURAL TIMBER FRAMED MASONRY INFLUERNCED BY SHALLOW FOUNDATION

    • Ramesh, M. - Kuklík, P., - Hlavatá, V.
    In: Proceedings of the 3rd International Conference on Protection of Historical Constructions PROHITECH´17. Lisboa: IST Press, 2017. ISBN 978-989-8481-58-0.
    2017
  • The Influence of Microfibril Angle on the Wood Stiffness Parameters

    • Vaněrek, J. - Martínek, R. - Čada, P., - Kuklík, P.
    In: Procedia Engineering. Kidlington Oxford OX GB: Elsevier, 2017. p. 1-264. vol. 195. ISSN 1877-7058.
    2017
  • Several comments on numerical modeling of shallow foundations

    • Ramesh, M. - Kuklík, P., - Válek, M.
    In: Procedia Engineering. Kidlington Oxford OX GB: Elsevier, 2017. p. 73-80. vol. 195. ISSN 1877-7058.
    2017
  • Multiscale hierarchical modeling of concrete

    • Šmilauer, V.
    Defense date 2018-04-04. Doctoral Thesis. CTU FCE. Department of Mechanics.
    2017
  • Additive manufacturing of tiles with functionally oriented geometry

    • Novák, J. - Tyburec, M. - Somr, M., - Janda, T.
    [Verified Technology] 2017.
    2017
  • Creep of Unfired Clay Mortar Based on Illitic Clay

    • Padevět, P. - Bittnar, P.
    In: EAN 2017 - 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 472-476. ISBN 9788055331676.
    2017
  • Vliv hydraulických gradientů a kolísání hladiny podzemních vod na stabilitu staveb

    • Kuklík, P. - Brouček, M.
    Zpravodaj ČSVTS. 2017, 2017(43), 48-51.
    2017
  • Random Heterogeneous Materials: Wang Tile Size vs Circular Particle Packing

    • Šedlbauer, D.
    In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. pp. 127-128. ISBN 978-80-261-0748-4.
    2017
  • Dynamic response of footbridges with tuned mass dampers

    • Máca, J.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
    2017
  • DIFFERENT VIEWS ON ADDITIONAL RANDOM PARAMETERS IN EXPERIMENT DESIGN FOR THERMOPHYSICAL PARAMETERS ESTIMATION

    • Jarušková, D. - Kučerová, A.
    In: UNCECOMP 2017. National Technical University of Athens, 2017. p. 543-553. 1. ISBN 978-618-82844-4-9.
    2017
  • Chemical processes

    • Schlangen, E. - van Zijl, G., - Kabele, P.
    In: A Framework for Durability Design with Strain-Hardening Cement-Based Composites. Dordrecht: Springer Science+Business Media B.V., 2017. p. 79-100. RILEM State-of-the-Art Reports. vol. 22. ISSN 2213-204X. ISBN 978-94-024-1012-9.
    2017
  • Strain-Hardening Cement-Based Composites

    • Mechtcherine, V. ed. - Slowik, V. ed., - Kabele, P. ed.
    Dresden, 2017-09-18/2017-09-20. Dordrecht: Springer Science+Business Media B.V., 2017. RILEM Bookseries. ISSN 2211-0844. ISBN 978-94-024-1193-5.
    2017
  • A Dynamic Analysis of the Cable-Stayed Footbridge in Čelákovice Town

    • Šána, V. - Polák, M., - Plachý, T.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2877-2882. vol. 199. ISSN 1877-7058.
    2017
  • Free vibration analysis of laminated glass beams using dynamic effective thickness and other approaches

    • Zemanová, A. - Zeman, J. - Janda, T., - Šejnoha, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1122-1125. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Challenges of Finite Element Discretization of Wang Cubes

    • Rypl, D. - Doškář, M.
    In: Proceedings of the 22nd International Conference on Computer Methods in Mechanics. Lublin: Lublin University of Technology, 2017. ISBN 978-83-7947-264-2.
    2017
  • Metodika pro moderní metodu měření osových sil v prvcích stavebních konstrukcí

    • Klier, T. - Míčka, T. - Junek, V. - Polák, M. - Plachý, T. - Šimler, M., - Smeták, T.
    [Other Methodology (not meeting RIV conditions)] 2017.
    2017
  • Verifikace a aplikace in situ moderní metody pro měření osových sil v prvcích stavebních konstrukcí

    • Klier, T. - Míčka, T. - Polák, M. - Šimler, M., - Smeták, T.
    In: Sanace 2017 - sborník recenzovaných přednášek. Brno: Sdružení pro sanace betonových konstrukcí, 2017. p. 71-80. ISBN 978-80-214-5499-6.
    2017
  • Moderní metoda pro měření osových sil v prvcích stavebních konstrukcí

    • Klier, T. - Míčka, T. - Polák, M. - Šimler, M., - Smeták, T.
    In: Sborník příspěvků 22. mezinárodní sympozium MOSTY/BRIDGES 2017. Brno: Sekurkon, 2017. p. 197-202. ISBN 978-80-86604-71-8.
    2017
  • FICTITIOUS DOMAIN METHOD FOR NUMERICAL SIMULATION OF INCOMPRESSIBLE VISCOUS FLOW AROUND RIGID BODIES

    • Beňo, M. - Patzák, B.
    Acta Polytechnica. 2017, 57(4), 245-251. ISSN 1210-2709.
    2017
  • Balisticky odolná lehká bariéra

    • Fornůsek, J. - Sovják, R. - Mára, M. - Zatloukal, J., - Konvalinka, P.
    [Prototype] 2017.
    2017
  • Zábradelní panely z UHPC pro rekonstrukci mostu v městě Sázava

    • Tichý, J. - Ryjáček, P. - Šmilauer, V. - Slánský, B.Jr., - Ševčík, S.
    In: 24. Betonářské dny 2017 - Sborník příspěvků. Praha: ČBS - Česká betonářská společnost ČSSI, 2017. p. 1-11. ISBN 978-80-906759-0-2.
    2017
  • WATER ABSORPTION CAPACITY COEFFICIENT AND MASS MOISTURE OF RAMMED EARTH MATERIAL

    • Mužíková, B. - Otcovská, T., - Padevět, P.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 85-88. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Dřík dentálního implantátu

    • Jíra, A. - Denk, F., - Denk, F.
    Czech Republic. Patent CZ 307126. 2017-12-13.
    2017
  • Trabekulární struktura 1

    • Řehounek, L. - Jíra, A., - Čejka, Z.
    [Functional Sample] 2017.
    2017
  • Modelling of Synchronized Jumping Crowds on Grandstands

    • Máca, J. - Rokoš, O.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 645-652. vol. 190. ISSN 1877-7058.
    2017
  • On Random Spatial Distribution of Active Crowds on Grandstands and Their Effects on Dynamic Response

    • Máca, J. - Rokoš, O.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2838-2843. vol. 199. ISSN 1877-7058.
    2017
  • Synthesized Enrichment Functions for Extended Finite Element Analyses with Fully Resolved Microstructure

    • Doškář, M. - Novák, J., - Zeman, J.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 29-34. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • MEFEL 2017

    • Kruis, J. - Koudelka, T.
    [Software] 2017.
    2017
  • METR 2017

    • Koudelka, T. - Krejčí, T.
    [Software] 2017.
    2017
  • GEFEL2017

    • Kruis, J. - Koudelka, T.
    [Software] 2017.
    2017
  • Two-scale framework for coupled problems

    • Koudelka, T. - Krejčí, T.
    In: International Conference of Computational Methods in Sciences and Engineering 2017, ICCMSE 2017. New York: AIP Conference Proceedings, 2017. vol. 1906. ISBN 9780735415966.
    2017
  • Processor farming in two-level analysis of historical bridge

    • Krejčí, T. - Kruis, J. - Koudelka, T., - Šejnoha, M.
    In: International Conference of Computational Methods in Sciences and Engineering 2017, ICCMSE 2017. New York: AIP Conference Proceedings, 2017. vol. 1906. ISBN 9780735415966.
    2017
  • Processor Farming Method for Multi-Scale Analysis of Masonry Structures

    • Krejčí, T. - Koudelka, T.
    In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
    2017
  • Analysis of Coupled Heat and Moisture Transport on Parallel Computers

    • Koudelka, T. - Krejčí, T.
    In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
    2017
  • Wang Tile Size in Terms of Circular Particle Dynamics

    • Šedlbauer, D.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 102-108. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Hierarchical stochastic model of terrain subsidence during tunnel excavation

    • Janda, T. - Šejnoha, M., - Šejnoha, J.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
    2017
  • Calibration of model for laminated glass polymer interlayer based on rheometer data

    • Schmidt, J. - Janda, T., - Šejnoha, M.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 1-7. ISBN 978-80-553-3167-6.
    2017
  • EXPERIMENTAL DETERMINATION OF VISCO-ELASIC PROPERTIES OF LAMINATED GLASS INTERLAYER

    • Schmidt, J. - Janda, T. - Šejnoha, M., - Valentin, J.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 850-853. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • PARALLEL APPROACH TO SOLVE OF THE DIRECT SOLUTION OF LARGE SPARSE SYSTEMS OF LINEAR EQUATIONS

    • Bošanský, M. - Patzák, B.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 50-53. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Digital image analysis for assessment of contact angles and stiffness of fiber reinforcement

    • Nežerka, V. - Hlůžek, R., - Trejbal, J.
    In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 10-12. ISBN 978-93-87405-61-5.
    2017
  • Microanalysis of Interfacial Tranzition Zone between Surface Modified Polymeric Fibers and Cement Matrix

    • Prošek, Z. - Rácová, Z. - Trejbal, J., - Hrbek, V.
    In: Nanotech / Biotech / Surtech Middle East 2017. Dubai: Science, Engineering, Technology Conferences Organisers, 2017.
    2017
  • Plasma treatment impact on physical and chemical properties of polymeric fibers

    • Hlůžek, R. - Prošek, Z. - Trejbal, J. - Fládr, J., - Potocký, Š.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 49-54. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Performance of cement composites reinforced with surface-modified polypropylene micro- and macro-fibers

    • Antoš, J. - Dejdar, L. - Trejbal, J., - Prošek, Z.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 11-15. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Pullout behavior of oxygen plasma treated polymer fibers from cement matrix

    • Trejbal, J. - Horová, T., - Prošek, Z.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 130-134. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • HYDRATION PROCESS AND MECHANICAL PROPERTIES OF CEMENT PASTE WITH RECYCLED CONCRETE POWDER AND SILICA SAND POWDER

    • Topič, J. - Prošek, Z.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 125-129. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Influence of Distribution of Finger Joints and Timber Flaws on the Damage Evolution of Laminated Glued Timber Beams

    • Melzerová, L. - Šejnoha, M.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 280-285. ISBN 978-80-553-3167-6.
    2017
  • Ověření chování skloviny pru určení lomové houževnatosti

    • Hájková, P. - Jíra, A.
    In: Biomateriály a jejich povrchy X.. Praha: Czech Technical University in Prague, 2017. p. 52. ISBN 978-80-01-06195-4.
    2017
  • Combining Homogenization, Indentation and Bayesian Inference in Estimating the Microfibril Angle of Spruce

    • Šejnoha, M. - Janda, T. - Vorel, J. - Kucíková, L., - Padevět, P.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 310-317. vol. 190. ISSN 1877-7058.
    2017
  • ADAPTIVE QUASICONTINUUM SIMULATION OF ELASTIC-BRITTLE DISORDERED LATTICES

    • Mikeš, K. - Jirásek, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 80-84. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • GEOMETRICAL OPTIMIZATION OF DENTAL IMPLANTS WITH REGARD TO OSSEOINTEGRATION

    • Řehounek, L. - Denk, F., - Jíra, A.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 97-101. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Výzkumná zpráva o vyhodnocení podélných odporů monitoringu

    • Kašpárek, J. - Stančík, V. - Ryjáček, P. - Polák, M., - Rotter, T.
    [Research Report] 2017.
    2017
  • MICRO-MECHANICAL PERFORMANCE OF CONCRETE USED AS RECYCLED RAW MATERIAL IN CEMENTITIOUS COMPOSITE

    • Hrbek, V. - Koudelková, V. - Prošek, Z., - Tesárek, P.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 55-60. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • EVALUATION OF EFFECTIVE PROPERTIES OF BASALT TEXTILE REINFORCED CERAMIC MATRIX COMPOSITES

    • Valentová, S. - Hrbek, V., - Šejnoha, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 142-147. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • USING HOMOGENIZATION AND NANOINDENTATION FOR MICROFIBRIL ANGLE DETERMINATION OF SPRUCE

    • Kucíková, L. - Hrbek, V. - Vorel, J., - Šejnoha, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 71-74. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Three-dimensional isogeometric curved beam element with locking treatment and its computational performance

    • Dvořáková, E. - Patzák, B.
    In: Proceedings of V International Conference on Isogeometric Analysis. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017.
    2017
  • On development of the interactive design tool based on Isogeometric analysis

    • Dvořáková, E. - Patzák, B.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 39-42. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Výzkumná zpráva popisující postup prací a dosažené výsledky za rok 2017

    • Ryjáček, P. - Rotter, T. - Kašpárek, J. - Polák, M. - Plachý, T. - Valentin, J., - Fišer, M.
    [Research Report] 2017.
    2017
  • TIME DEPENDENCE OF BONDING CAPACITY OF PLASMA-TREATED POLYMER FIBERS

    • Trejbal, J. - Somr, M., - Antoš, J.
    In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 13-16. ISBN 978-93-87405-61-5.
    2017
  • IMPACT OF SURFACE PLASMA TREATMENT ON THE PERFORMANCE OF PET SCATTERED FIBER REINFORCEMENT

    • Antoš, J. - Trejbal, J.
    In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 17-20. ISBN 978-93-87405-61-5.
    2017
  • Coupled Simulation for Fire-Exposed Structures using CFD and Thermo-Mechanical Models

    • Šulc, S. - Šmilauer, V., - Wald, F.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Long-Time Investigation of Cement Composite Material with Micronized Waste Marble Powder: Dynamic Modules

    • Prošek, Z. - Topič, J.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 93-96. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • THE EFFECT OF PLASTICIZER ON MECHANICAL PROPERTIES OF THE CEMENT PASTE WITH FINE GROUND RECYCLED CONCRETE

    • Hrůza, J. - Prošek, Z.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 61-65. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Foamed Cement Composites: Detection of the Modulus of Elasticity Using Dic Analysis and Comparison with Other Methods

    • Ďureje, J. - Prošek, Z.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 35-38. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • MuPIF, ver. 2.0

    • Patzák, B. - Šmilauer, V., - Horák, M.
    [Software] 2017.
    2017
  • OOFEM, ver. 2.5

    • Patzák, B. - Jirásek, M. - Šmilauer, V. - Horák, M. - Havlásek, P. - Dvořáková, E. - Kolařík, F. - Mikeš, K., - Ohman, M.
    [Software] 2017.
    2017
  • Modeling Adhesive Anchors in a Discrete Element Framework

    • Marcon, M. - Vorel, J. - Nincevic, K., - Wan-Wendner, R.
    Materials. 2017, 10(8), ISSN 1996-1944.
    2017
  • EFFECTIVE HEAT AND MOISTURE TRANSPORT PROPERTIES OF SPRUCE

    • Kucíková, L. - Vorel, J. - Sýkora, J., - Šejnoha, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 550-553. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • BACK ANALYSIS FOR DETERMINATION OF TENSION-SOFTENING DIAGRAM

    • Vorel, J. - Kabele, P.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1042-1045. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • The complex approach to optimization of composite bridges

    • Žitný, J. - Ryjáček, P., - Lepš, M.
    In: Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure. Londýn: Taylor & Francis Group, 2017. p. 1881-1890. ISBN 978-1-138-02847-0.
    2017
  • OPTIMIZATION-BASED APPROACH TO TILING OF FINITE AREAS WITH ARBITRARY SETS OF WANG TILES

    • Tyburec, M. - Zeman, J.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 135-141. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • COMPARISON OF FAILURE CRITERIA FOR WOOD IN TENSILE-SHEAR STRESS STATE

    • Šmídová, E. - Kabele, P.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 115-120. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • NMM 2017 - Nano & Macro Mechanics 2017

    • Padevět, P. ed.
    Praha, 2017-09-21. Praha: Czech Technical University in Prague, 2017. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Overview of Ensemble of Surrogates

    • Myšáková, E.
    In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
    2017
  • Comparison of Methods Used for Seismic Analysis of Structures

    • Čada, P. - Máca, J.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 20-28. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Modeling glulams in linear range with parameters updated using Bayesian inference

    • Šejnoha, M. - Janda, T. - Melzerová, L. - Nežerka, V., - Šejnoha, J.
    Engineering Structures. 2017, 138 293-307. ISSN 0141-0296.
    2017
  • Rehabilitation of Reinforced Concrete by Electrochemical chloride extraction and Nanoparticle Injection

    • Němeček, J.
    [Unpublished Lecture] UCSD. 2017-03-10.
    2017
  • Electrokinetic nanoparticle injection for remediating leaks in oil well cement

    • Němeček, J. - Li, L., - Xi, Y.
    Construction and Building Materials. 2017, 156 63-72. ISSN 0950-0618.
    2017
  • Static and dynamic responses of a novel Al nanocomposite foam/sandwich structure under bending, impact and quasi-static compression tests

    • Hosseini, S.M. - Habibolahzadeh, A., - Němeček, J.
    Journal of Sandwich Structures and Materials. 2017, 2017 1-22. ISSN 1099-6362.
    2017
  • Deformation of a prestressed liquid lens membrane

    • Pokorný, P. - Šmejkal, F. - Kulmon, P. - Novák, P. - Novák, J. - Mikš, A. - Horák, M., - Jirásek, M.
    Applied Optics. 2017, 56(34), 9368-9376. ISSN 1559-128X.
    2017
  • Způsob měření délkových změn stavebních materiálů v modelových extrémních podmínkách a zařízení k provádění tohoto způsobu

    • Hadraba, D. - Sovják, R. - Hošek, J. - Černý, R. - Vejmelková, E., - Konvalinka, P.
    Czech Republic. Patent CZ 307020. 2017-10-04.
    2017
  • Optimal shape of truss structures supporting protective walls

    • Procházka, P. - Válek, M.
    In: Safety and Security Engineering VII. Wessex: WIT PRESS, 2017. p. 108-120. ISBN 978-1-78466-211-0.
    2017
  • Modeling the impacts of explosion in enclosed spaces using discontinuous boundary element and finite volume methods

    • Procházka, P. - Pešková, Š.
    In: Boundary Elements and other Mesh Reduction Methods XXXX. Southampton: Witpress, 2017. p. 96-108. ISBN 978-1-78466-227-1.
    2017
  • Sensitivity Analysis of Laser Drawing Process of Mg tubes

    • Janouchová, E. - Lepš, M.
    In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. ISBN 978-80-261-0748-4.
    2017
  • CONSTRUCTION OF RANDOM FIELD BASED ON IMAGE ANALYSIS

    • Sýkora, J. - Kučerová, A., - Zeman, J.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 958-961. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Comparison of viscoelastic finite element models for laminated glass beams

    • Zemanová, A. - Zeman, J., - Šejnoha, M.
    International Journal of Mechanical Sciences. 2017, 131 380-395. ISSN 0020-7403.
    2017
  • Hydrophonic and Biocidal Properties of Electrospun SiO2 Nanofibers

    • Tichá, P. - Rácová, Z. - Sveshnikov, A. - Trejbal, J. - Baudys, M., - Demo, P.
    In: NANOCON 2017 ABSTRACTS. Ostrava: TANGER, 2017. ISBN 978-80-87294-78-9.
    2017
  • Processor farming in two-level analysis of historical bridge

    • Krejčí, T. - Kruis, J. - Koudelka, T., - Šejnoha, M.
    In: Proceedings of the Fifth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Stirling: Civil-Comp Press Ltd, 2017. ISSN 1759-3433. ISBN 978-1-905088-66-9.
    2017
  • Hybrid parallel approach to homogenization of transport processes in masonry

    • Krejčí, T. - Kruis, J. - Šejnoha, M., - Koudelka, T.
    Advances in Engineering Software. 2017, 113 25-33. ISSN 0965-9978.
    2017
  • Coupled Hydro-Mechanical Model for Expansive Clays

    • Koudelka, T. - Krejčí, T., - Kruis, J.
    In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
    2017
  • MODELING OF CHLORIDE MIGRATION IN CONCRETE

    • Němeček, J. - Kruis, J., - Koudelka, T.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 710-713. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • NUMERICAL MODELLING OF EXPANSIVE CLAYS

    • Koudelka, T. - Krejčí, T., - Kruis, J.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 502-505. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Numerical analysis of coupled heat and moisture transport in masonry

    • Krejčí, T. - Kruis, J. - Šejnoha, M., - Koudelka, T.
    Computers and Mathematics with Applications. 2017, 74(1), 229-248. ISSN 0898-1221.
    2017
  • Influence of alloying element Zn on the microstructural, mechanical and corrosion properties of binary Mg-Zn alloys after severe plastic deformation

    • Němec, M. - Jäger, A. - Tesař, K., - Gärtnerová, V.
    Materials Characterization. 2017, 2017(134), 69-75. ISSN 1044-5803.
    2017
  • An Additively Manufactured Modular Metamaterial Composed of a Single Cell

    • Nežerka, V. - Somr, M. - Janda, T. - Doškář, M. - Zeman, J., - Novák, J.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 325-330. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • The Response of a SDOF System Driven by a Periodic Random Force

    • Šána, V. - Rokoš, O., - Máca, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 153-158. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Influence of Stationary Vehicles on Bridge Aerodynamic and Aeroelastic Coefficients

    • Kozmar, H - Buljac, A - Pospíšil, S - Macháček, M. - Král, R, - Kuznětsov, S
    Journal of Bridge Engineering. 2017, 4(22), ISSN 1084-0702.
    2017
  • Aerodynamic and aeroelastic characteristics of typical bridge decks equipped with wind barriers at the windward bridge-deck edge

    • Buljac, A. - Kozmar, H. - Pospíšil, S., - Macháček, M.
    Engineering Structures. 2017, 2017(137), 310-322. ISSN 0141-0296.
    2017
  • Calculation of Shell Structures by Using Layered Model

    • Fiedler, J. - Koudelka, T.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 306-309. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • ON PARALLELIZATION OF LINEAR SYSTEM EQUATION SOLVER IN FINITE ELEMENT SOFTWARE

    • Bošanský, M. - Patzák, B.
    In: Proceedings of Engineering Mechanics 2017. Brno: Brno University of Technology, 2017. p. 198-201. ISSN 1805-8248. ISBN 9788021454972.
    2017
  • Micromechanical performance of interfacial transition zone in fiber-reinforced cement matrix

    • Zacharda, V. - Němeček, J., - Štemberk, P.
    In: Fibre Concrete 2017. Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 246. ISSN 1757-899X.
    2017
  • Study on time-dependent surface properties of plasma treated polymer micro-fibers

    • Trejbal, J. - Valentová, T. - Potocký, Š. - Prošek, Z., - Tesárek, P.
    In: European Advanced Materials Congress. Linkoping: VBRI Press AB, 2017. ISBN 978-91-88252-06-7.
    2017
  • Interfacial shear strength enhancement of polymeric macro-fibers via plasma treatment

    • Prošek, Z. - Trejbal, J. - Tesárek, P. - Kopecký, L., - Potocký, Š.
    In: European Advanced Materials Congress. Linkoping: VBRI Press AB, 2017. ISBN 978-91-88252-06-7.
    2017
  • ASSESSMENT OF 2D-DIC STOCHASTIC PATTERNS

    • Antoš, J. - Nežerka, V., - Somr, M.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 1-10. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • Evaluation of glued laminated timber beams reinforced with carbon fiber fabric for use in FEM modelling

    • Klapálek, P. - Melzerová, L.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 231-234. ISBN 978-80-553-3167-6.
    2017
  • Microscopic Analysis of Interfacial Transition Zone of Cementitious Composites Prepared by Various Mixing Procedures

    • Bílý, P. - Fládr, J. - Němeček, J., - Koudelková, V.
    In: 19. WASET Conference Proceedings. Waset.org: World Academy of Science, Engineering and Technology, 2017. p. 2259-2263. San Francisco USA. vol. 19(9)XVIII. ISSN 2010-376X.
    2017
  • A Comparison of Spectators Induced Grandstand Vibrations and Fans Behavior during Two Ice Hockey Games between the Same Teams in the Regular Season and in the Playoffs

    • Polák, M. - Plachý, T., - Verner, M.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 510-515. vol. 190. ISSN 1877-7058.
    2017
  • An Experimental Study Focused on Spectators' Behavior and Induced Vibrations of a Reinforced Concrete Grandstand on a Football Stadium

    • Plachý, T. - Polák, M., - Verner, M.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2871-2876. vol. 199. ISSN 1877-7058.
    2017
  • Assessment of an Old Steel Railway Bridge Using Dynamic Tests

    • Plachý, T. - Polák, M., - Ryjáček, P.
    In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 3053-3058. vol. 199. ISSN 1877-7058.
    2017
  • The in Situ Application of a New Approach to Experimental Estimation of Tensile Forces in Prestressed Structural Elements by Method Based on the Magnetoelastic Principle

    • Klier, T - Míčka, T - Polák, M. - Plachý, T. - Šimler, M, - Smeták, T
    In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 122-132. ISBN 978-80-553-3167-6.
    2017
  • Probabilistic Approach to Damage of Tunnel Lining Due to Fire

    • Šejnoha, J. - Sýkora, J. - Novotná, E., - Šejnoha, M.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
    2017
  • Comparison of Fans' Behavior and Grandstand Dynamic Response During Two Hockey Matches Between the Same Teams

    • Verner, M. - Polák, M., - Plachý, T.
    In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 607-610. ISBN 978-80-553-3167-6.
    2017
  • Comparison of the Fans´ Behaviour and the Induced Grandstand Vibrations on Two Different Football Stadia

    • Plachý, T. - Polák, M., - Verner, M.
    In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
    2017
  • The Verification of a New Approach to the Experimental Estimation of Tensile Forces in Prestressed Structural Elements by Method Based on the Magnetoelastic Principle

    • Klier, T - Míčka, T - Plachý, T. - Polák, M. - Smeták, T, - Šimler, M
    In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
    2017
  • Tvarová optimalizace dentálního implantátu pro zlepšení osteointegrace a mechanické únosnosti

    • Řehounek, L. - Denk, F., - Jíra, A.
    In: Biomateriály a jejich povrchy X.. Praha: Czech Technical University in Prague, 2017. ISBN 978-80-01-06195-4.
    2017
  • Parallel modeling of hygrothermal performance of external wall made of highly perforated bricks

    • Maděra, J. - Kočí, J. - Kočí, V., - Kruis, J.
    Advances in Engineering Software. 2017, 113 47-53. ISSN 0965-9978.
    2017
  • Micromechanical Analysis of Complex Structures by Nanoindentation

    • Hájková, P. - Jíra, A.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 60-65. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Numerical model of a 3D-printed titanium structure for use in implant dentistry

    • Řehounek, L. - Jíra, A., - Denk, F.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 21-26. ISBN 978-80-553-3167-6.
    2017
  • Sbírka příkladů stavební mechaniky

    • Jíra, A. - Jandeková, D. - Hlobilová, A. - Janouchová, E., - Zrůbek, L.
    Praha: ČVUT, Fakulta stavební, Katedra mechaniky, 2017. 1. vol. 1. ISBN 978-80-01-06301-9.
    2017
  • Nanoindentace a její aplikace pro cementové materiály

    • Němeček, J. - Rymeš, J. - Koudelková, V., - Němeček, J.
    In: Juniorstav 2017, 19. odborná konference doktorského studia. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2017. ISBN 978-80-214-5473-6.
    2017
  • An adaptive variational Quasicontinuum methodology for lattice networks with localized damage

    • Rokoš, O. - Peerlings, R. H. J. - Zeman, J., - Beex, L. A. A.
    International Journal for Numerical Methods in Engineering. 2017, 112(2), 174-200. ISSN 0029-5981.
    2017
  • Nanoindentace a její aplikace pro cementové materiály

    • Němeček, J. - Rymeš, J. - Koudelková, V., - Němeček, J.
    In: Juniorstav 2017, Sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2017. pp. 75. ISBN 978-80-214-5462-0.
    2017
  • Different Approaches to Estimation of Variability in Properties of Heterogeneous Materials

    • Janouchová, E.
    In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
    2017
  • Durability assessment of reinforced concrete structures due to chloride ingress up and beyond induction period

    • Šmilauer, V. - Hájková, K. - Jendele, L., - Červenka, J.
    In: 39th IABSE Symposium. Zürich: IABSE c/o ETH Hönggerberg, 2017. p. 2488-2495. ISBN 978-3-85748-153-6.
    2017
  • Validation of CTU Prague thermo-mechanical simulator with TU Graz restraining frame experiments

    • Hájková, K. - Schlicke, D. - Turner, K. - Šmilauer, V., - Heinrich, P.
    In: 2ND INTERNATIONAL RILEM/COST CONFERENCE ON EARLY AGE CRACKING AND SERVICEABILITY IN CEMENT-BASED MATERIALS AND STRUCTURES Volume 2. Cachan: RILEM Publications, 2017. p. 703-708. ISBN 978-2-35158-200-8.
    2017
  • MoleMOD: On design specification and applications of a self-reconfigurable constructional robotic system

    • Petrš, J. - Havelka, J. - Florián, M., - Novák, J.
    In: ShoCK! Sharing of Computable Knowledge! Proceedings of the 35th International Conference on Education and Research in Computer Aided Architectural Design in Europe, 20th-22nd September 2017, Rome, Italy. Volume 1.. Řím: Sapienza University of Rome, 2017. p. 159-166. vol. 1. ISBN 9789491207129.
    2017
  • The calibration program for the hypoplastic sand model

    • Kadlíček, T. - Janda, T., - Šejnoha, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 430-433. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Influence of increasing amount of recycled concrete powder on mechanical properties of cement paste

    • Topič, J. - Prošek, Z., - Plachý, T.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
    2017
  • Utilization of the waste from the marble industry for application in transport infrastructure: mechanical properties of cement pastes

    • Prošek, Z. - Trejbal, J. - Topič, J. - Plachý, T., - Tesárek, P.
    In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
    2017
  • Application of Boundary Inverse Methods in Civil Engineering

    • Havelka, J.
    In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
    2017
  • Analysis of Experimental and Calculated Values of Shear Broken Cement Paste

    • Mužíková, B. - Padevět, P. - Bittnar, P., - Antoš, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 20-26. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Computational performance of a DSG-based isogeometric beam element

    • Dvořáková, E. - Patzák, B.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 290-293. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • MICROSCOPIC FEATURES OF CEMENT PASTE MODIFIED BY FINE PERLITE

    • Hrbek, V. - Koudelkova, V. - Padevět, P., - Sasek, P.
    In: ExNum 2016. Praha: CESKE VYSOKE UCENI TECHNICKE V PRAZE, 2017. p. 12-16. vol. 7. ISSN 2336-5382. ISBN 978-80-01-06070-4.
    2017
  • Grid indentation and statistic deconvolution: Limitations and accuracy

    • Hrbek, V. - Koudelková, V.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 15-22. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Svetelná linka

    • Sivý, D. - Antoš, J.
    [Technical and Art Work] - Prov. org. FEL ČVUT, Fak. elektrotechnická, Technická 2 166 27 Praha 6, dat. prov. - zač. 2017-07-01 ukonč. 2017-07-31.
    2017
  • Cyclic Temperature Loading: Residual Flexural Strength of Refractory Slabs

    • Holčapek, O. - Reiterman, P., - Konvalinka, P.
    Acta Polytechnica. 2017, 57(2), 97-104. ISSN 1210-2709.
    2017
  • Water absorption properties of rammed earth material with montmorillonite clay

    • Mužíková, B. - Otcovská, T., - Padevět, P.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 398-401. ISBN 978-80-553-3167-6.
    2017
  • Usage of Illite-kaolinitic Clay for Rammed Earth Manufacturing and Its Drying Rate

    • Otcovská, T. - Mužíková, B., - Padevět, P.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 388-391. ISBN 978-80-553-3167-6.
    2017
  • Measurements of dynamic wind pressures on gable roofs - Comparison with ČSN en 1991-1-4

    • Pospíšil, S. - Macháček, M. - Hračov, S. - Kuznetsov, S., - Trush, A.
    In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
    2017
  • Computational aspects of RBFN meta-models for multi-objective RBDO formulation

    • Hlobilová, A. - Lepš, M.
    In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
    2017
  • Parallelization of Reliability-based Design Optimization using Surrogates

    • Hlobilová, A. - Lepš, M.
    In: Proceedings of the Fifth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Stirling: Civil-Comp Press Ltd, 2017. p. 1-16. ISSN 1759-3433. ISBN 978-1-905088-66-9.
    2017
  • Stochastic Finite Element Method

    • Havelka, J.
    [Software] 2017.
    2017
  • Výpočet kondenzace vodní páry v tunelech

    • Mračková, M. - Patzák, B. - Šmilauer, V., - Pruška, J.
    Tunel. 2017, 26(3), 40-47. ISSN 1211-0728.
    2017
  • Příkopová tvarovka

    • Lidmila, M. - Lojda, V. - Nežerka, V., - Somr, M.
    Czech Republic. Industrial Design CZ 37103. 2017-08-30.
    2017
  • MECHANICAL BEHAVIOR OF A TITANIUM ALLOY TRABECULAR STRUCTURE

    • Řehounek, L. - Jíra, A., - Denk, F.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 818-821. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Experimental and numerical analyses of a 3D-printed titanium trabecular dental implant

    • Řehounek, L. - Jíra, A.
    Acta Polytechnica. 2017, 57(3), 218-228. ISSN 1805-2363.
    2017
  • Determination of fracture toughness of human enamel by nanoindentation based on energy release method

    • Hájková, P. - Jíra, A.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 15-20. ISBN 978-80-553-3167-6.
    2017
  • Comparation of mechanical responses of dental implants manufactured by 3D printing and machining

    • Jíra, A. - Denk, F.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 45-49. ISBN 978-80-553-3167-6.
    2017
  • Modular-Topology Optimization of Truss Structures Composed of Wang Tiles

    • Tyburec, M. - Zeman, J. - Doškář, M. - Lepš, M., - Novák, J.
    [Unpublished Lecture] 2017-06-23.
    2017
  • Properties and microstructure of cement paste including recycled concrete powder

    • Topič, J. - Prošek, Z.
    Acta Polytechnica. 2017, 57(1), 49-57. ISSN 1210-2709.
    2017
  • Shrinkage of cement composite with material based on waste marble and limestone

    • Hlubocký, L. - Prošek, Z.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 80-85. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Hydration heat evolution of the cement paste with recycled concrete: Influence of grain size distribution of recycled concrete powder

    • Topič, J. - Prošek, Z.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 37-42. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Destructive Testing of cement paste with micronized waste marble powder as partial replacement for cement - Long time development of mechanical properties

    • Prošek, Z. - Topič, J., - Tesárek, P.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 451-454. ISBN 978-80-553-3167-6.
    2017
  • Influence of Different Admixtures on Hydration Process and Mechanical Properties of Cement Paste

    • Topič, J. - Prošek, Z. - Plachý, T., - Tesárek, P.
    In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 455-458. ISBN 978-80-553-3167-6.
    2017
  • Effect of Poly(vinyl-alcohol) amount on flexural strength of cement mortars with micronized recycled concrete

    • Tesárek, P. - Prošek, Z., - Fládr, J.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 509-512. ISBN 978-80-553-3167-6.
    2017
  • Interaction enhancement between recycled PET macro-fiber reinforcement and cement matrix via plasma treatment

    • Trejbal, J. - Prošek, Z. - Tesárek, P., - Dejdar, L.
    In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 577-580. ISBN 978-80-553-3167-6.
    2017
  • EFFECTIVE ELASTIC AND STRENGTH PROPERTIES OF UNIDIRECTIONAL FIBROUS CERAMIC COMPOSITES

    • Valentová, S. - Vorel, J., - Šejnoha, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1010-1013. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Quasicontinuum method extended to irregular lattices

    • Mikeš, K. - Jirásek, M.
    Computers and Structures. 2017, 192 50-70. ISSN 0045-7949.
    2017
  • A finite element perspective on nonlinear FFT-based micromechanical simulations

    • Zeman, J. - de Geus, T. W. J. - Vondřejc, J. - Peerlings, R. H. J., - Geers, M.G.D.
    International Journal for Numerical Methods in Engineering. 2017, 111(10), 903-926. ISSN 0029-5981.
    2017
  • Modular-Topology Optimization of Truss Structures Composed of Wang Tiles

    • Tyburec, M. - Zeman, J., - Kučerová, A. opon.
    Defense date 2017-02-09. Master Thesis. CTU FCE. Department of Mechanics; CTU FCE. Experimental Centre.
    2017
  • Non-invasive Inverse Problem in Civil Engineering

    • Havelka, J. - Sýkora, J., - Kučerová, A.
    In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 43-48. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
    2017
  • ON EFFICIENCY OF QUASICONTINUUM SIMULATION OF CRACK PROPAGATION IN ELASTIC-BRITTLE DISORDERED LATTICES

    • Mikeš, K. - Jirásek, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 662-665. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Adaptive Quasicontinuum Simulation of Crack Propagation in Disordered Lattices

    • Mikeš, K. - Jirásek, M.
    In: ISCAMI2017, Proceedings of the 18th International Student Conference on Applied Mathematics and Informatics. University of Ostrava, 2017. p. 33-34. ISBN 978-80-7464-921-9.
    2017
  • Shifting of LHS Design for Surrogate Modeling

    • Myšáková, E. - Lepš, M.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 690-693. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Identification of Variability in Heterogeneous Material Properties Based on Hierarchical Modelling

    • Janouchová, E. - Kučerová, A.
    In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
    2017
  • Dvouplášťové ostění podzemních děl a způsob stanovení únosnosti tohoto ostění

    • Hořejší, J. - Mařík, L. - Pešková, Š. - Šmilauer, V. - Procházka, P. - Konvalinka, P. - Vogel, F., - Sovják, R.
    Czech Republic. Patent CZ 306781. 2017-05-24.
    2017
  • Boundary Inverse for General Transport Model

    • Havelka, J.
    [Software] 2017.
    2017
  • Calculation of nonlinearly deformed membrane shape of liquid lens caused by uniform pressure

    • Pokorný, P. - Šmejkal, F. - Kulmon, P. - Novák, P. - Novák, J. - Mikš, A. - Horák, M., - Jirásek, M.
    Applied Optics. 2017, 56(21), 5939-5947. ISSN 1559-128X.
    2017
  • Role of Random Factors in Nonlinear Regression: a Case Study for Estimation of Thermophysical Parameters

    • Janouchová, E. - Kučerová, A., - Sýkora, J.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 410-413. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • EVALUATION OF THE APPLICATION OF A THERMAL INSULATION SYSTEM: IN-SITU COMPARISON OF SEASONAL AND DAILY CLIMATIC FLUCTUATIONS

    • Fořt, J. - Černý, R. - Konvalinka, P. - Pavlík, Z., - Beran, P.
    Acta Polytechnica. 2017, 57(3), 159-166. ISSN 1210-2709.
    2017
  • Application of Boundary Inverse Methods in Civil Engineering

    • Havelka, J. - Sýkora, J. supervisor
    Defense date 2017-02-23. Doctoral Minimum. CTU FCE. Department of Mechanics. Supervised by J. SÝKORA.
    2017
  • EFFECT OF AMBIENT CONDITIONS ON THE PROPERTIES OF CONCRETE CONTAINING WASTE MATERIALS AS PARTIAL PORTLAND CEMENT REPLACEMENT

    • Černý, R. - Čáchová, M. - Koňáková, D. - Vejmelková, E., - Konvalinka, P.
    In: 17th International Multidisciplinary Scientific Geoconference SGEM 2017. Sofia: STEF92 Technology Ltd., 2017. p. 131-138. Nano, Bio, Green and Space - Technologies for a Sustainable Future, Issue 62. vol. 17. ISSN 1314-2704. ISBN 978-619-7408-13-3.
    2017
  • ENGINEERING PROPERTIES OF CONCRETE SUITABLE FOR CONSTRUCTING PHYSICAL BARRIERS IN RADIOACTIVE WASTE DISPOSAL FACILITIES

    • Vejmelková, E. - Koťátková, J. - Bezdička, P. - Konvalinka, P., - Černý, R.
    In: 17th International Multidisciplinary Scientific Geoconference SGEM 2017. Sofia: STEF92 Technology Ltd., 2017. p. 147-154. Nano, Bio, Green and Space - Technologies for a Sustainable Future, Issue 62. vol. 17. ISSN 1314-2704. ISBN 978-619-7408-13-3.
    2017
  • Calderón's Inverse Problem in Civil Engineering

    • Havelka, J. - Sýkora, J., - Kučerová, A.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 370-373. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Künzel Model and Boundary Inverse Problem

    • Havelka, J. - Sýkora, J., - Kučerová, A.
    In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
    2017
  • Numerical solution of deformation of circular membrane of liquid lens under uniform hydrostatic pressure

    • Pokorný, P. - Šmejkal, F. - Kulmon, P. - Mikš, A. - Novák, J. - Novák, P. - Jirásek, M., - Horák, M.
    In: Proceedings of SPIE: Modeling Aspects in Optical Metrology VI. Baltimore: SPIE, 2017. p. 1033016-1-1033016-8. vol. 10330. ISSN 0277-786X. ISBN 9781510611054.
    2017
  • IMPLEMENTATION OF 3D VOF TRACKING ALGORITHM BASED ON BINARY SPACE-PARTITIONING

    • Kolařík, F. - Patzák, B.
    Acta Polytechnica. 2017, 57(2), 105-115. ISSN 1210-2709.
    2017
  • eXtended variational quasicontinuum methodology for lattice networks with damage and crack propagation

    • Rokoš, O. - Peerlings, R. H. J., - Zeman, J.
    Computer Methods in Applied Mechanics and Engineering. 2017, 320 769-792. ISSN 0045-7825.
    2017
  • Coupled Simulation for Fire-Exposed Structures using CFD and Thermo-Mechanical Models

    • Šulc, S. - Šmilauer, V., - Wald, F.
    In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. ISSN 1805-8248. ISBN 978-80-214-5497-2.
    2017
  • Static response of double shell concrete lining with a spray-applied waterproofing membrane

    • Vogel, F. - Sovják, R., - Pešková, Š.
    Tunnelling and Underground Space Technology. 2017, 68 106-112. ISSN 0886-7798.
    2017
  • Experimentální vyšetřování mechanické energie absorbované prvky z vysokohodnotného vlákny vyztuženého betonu

    • Konrád, P. - Kabele, P. opon., - Sovják, R.
    Defense date 2017-02-14. Master Thesis. CTU FCE. Experimental Centre.
    2017
  • Ocelový most v Mirošově s extrémně stlačenou stavební výškou - projekt, realizace a experiment

    • Ryjáček, P. - Stančík, V. - Polák, M. - Plachý, T., - Pokorný, M.
    In: Sborník příspěvků 22. mezinárodní sympozium MOSTY/BRIDGES 2017. Brno: Sekurkon, 2017. p. 343-349. ISBN 978-80-86604-71-8.
    2017
  • Engineering microstructures of slag-blended cements and alkali-activated foams - experiments and modelling

    • Šmilauer, V. - Hlobil, M., - Hlaváček, P.
    In: Proceedings of the 5th international slag valorization symposium. Katholieke University Leuven, 2017. p. 411-424. 1. vol. 1. ISBN 9789090302942.
    2017
  • Interface Enhancement Between Polymeric Macro Fibers and Cement Matrix by Plasma Treatment

    • Trejbal, J. - Šmilauer, V. - Kopecký, L. - Artemenko, A., - Potocký, Š.
    In: NANOCON 2016 Conference Proceedings. Ostrava: TANGER, 2017. p. 368-373. ISBN 978-80-87294-71-0.
    2017
  • Carbon Microfibers Surface Changes Induced by Oxygen Plasma Treatment

    • Prošek, Z. - Tesárek, P. - Trejbal, J. - Holub, P. - Havrda, J., - Potocký, Š.
    In: NANOCON 2016 Conference Proceedings. Ostrava: TANGER, 2017. p. 330-334. ISBN 978-80-87294-71-0.
    2017
  • Origin of reverse compositional and textural zoning in granite plutons by localized thermal overturn of stratified magma chambers

    • Trubač, J. - Janoušek, V. - Žák, J. - Somr, M. - Kabele, P. - Švancara, J. - Gerdes, A., - Žáčková, E.
    Lithos. 2017, 277 315-336. ISSN 0024-4937.
    2017
  • Durability of Concrete with Fly Ash from the Dam Orlík after 55 Years

    • Zobal, O. - Reiterman, P. - Plachý, T., - Bittnar, Z.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 81-87. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Dependence of Tensile Bending Strength of Rammed Earth on Used Clay Composition and Amount of Mixture Water

    • Otcovská, T. - Padevět, P.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 48-53. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Early Stage Microstructure Development of Cement Paste Modified by Crystalline Admixture

    • Hrbek, V. - Koudelková, V., - Němeček, J.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 92-99. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Fracture Properties of Mg - Alloys Assessed with Nanoindentation

    • Němeček, J. - Hrbek, V. - Koudelková, V., - Hlaváček, P.
    In: Metallography XVI. Curich: Trans Tech Publications, 2017. p. 257-262. Materials Science Forum. vol. 891. ISSN 0255-5476. ISBN 978-3-0357-1018-2.
    2017
  • Numerical aspects of microplane constitutive models for concrete

    • Huang, L. C. - Li, J. - Tue, N. V., - Němeček, J.
    Applied Mathematical Modelling. 2017, 41 530-548. ISSN 0307-904X.
    2017
  • Nano-SiCp effects on the production, microstructural evolution and compressive properties of highly porous.Al/CaCO3 foam fabricated via continual annealing and roll-bonding process

    • Hosseini, S. M. - Habibolahzadeh, A. - Králík, V. - Petráňová, V., - Němeček, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2017, 680 157-167. ISSN 0921-5093.
    2017
  • Příkopová tvarovka z recyklovaného plastu

    • Lojda, V. - Lidmila, M. - Nežerka, V., - Somr, M.
    Czech Republic. Industrial Design Application.
    2017
  • Příkopová tvarovka z recyklovaného plastu

    • Lidmila, M. - Lojda, V. - Somr, M., - Nežerka, V.
    Czech Republic. Patent Application.
    2017
  • Příkopová tvarovka z recyklovaného plastu

    • Lojda, V. - Lidmila, M. - Nežerka, V., - Somr, M.
    Czech Republic. Patent Application.
    2017
  • Odborná zpráva o postupu prací a dosažených výsledcích v oblasti dentálních implantátů

    • Jíra, A. - Denk, F. - Denk, F. - Goldmann, T., - Bodlák, D
    [Research Report] Praha: CTU. Faculty of Civil Engineering, 2017. Report no. 4.
    2017
  • Dřík dentálního implantátu

    • Jíra, A. - Denk, F., - Denk, F.
    Czech Republic. Utility Model CZ 30382. 2017-02-21.
    2017
  • Finite strain FFT-based non-linear solvers made simple

    • de Geus, T.W.J. - Vondřejc, J. - Zeman, J. - Peerlings, R.H.J., - Geers, M.G.D.
    Computer Methods in Applied Mechanics and Engineering. 2017, 318 412-430. ISSN 0045-7825.
    2017
  • Time Depend Wettability Deterioration of Plasma Treated Polymeric Macro-Fibers

    • Trejbal, J. - Tesárek, P., - Potocký, Š.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 43-48. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Utilization of Plasma Treated Polymeric Macro-Fibers as Reinforcement in Concrete Constructions

    • Trejbal, J. - Fládr, J., - Kopecký, L.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 70-75. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Odborná zpráva o postupu prací a dosažených výsledcích za rok 2016 (projekt TA04031603)

    • Šejnoha, M.
    [Research Report] Praha: Technologická agentura ČR, 2017.
    2017
  • Ternary binder incorporating CFBC fly ash: microstructure evolution and micromechanical strength predictions

    • Šmilauer, V. - Hlaváček, P. - Šulc, R. - Škvára, F., - Snop, R.
    In: EuroCoalAsh 2017. Brno: Brno University of Technology, 2017. p. 82-86. 1. vol. 1. ISBN 978-80-214-5469-9.
    2017
  • Navrhování betonových konstrukcí s využitím genetického algoritmu

    • Mádlová, J. - Kruis, J. opon., - Štemberk, P.
    Praha: Defense date 2017-02-13. Master Thesis. CTU FCE. Department of Concrete and Masonry Structures.
    2017
  • Microstructural Analysis of Fly Ash-Based Stabilizer for Track Bed

    • Lojda, V. - Zikmund, T. - Sojka, K. - Kaiser, J. - Prošek, Z., - Lidmila, M.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 66-73. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • OCELOVÝ MOST V MIROŠOVĚ S EXTRÉMNĚ STLAČENOU STAVEBNÍ VÝŠKOU - PROJEKT, REALIZACE A EXPERIMENT

    • Ryjáček, P. - Stančík, V. - Polák, M. - Plachý, T., - Pokorný, M.
    In: Železniční mosty a tunely 2017, sborník příspěvků. Praha: SUDOP Praha a.s., 2017. p. 125-133. ISBN 978-80-906789-0-3.
    2017
  • Experimentální činnosti při a po výstavbě mostu Oskar

    • Ryjáček, P. - Polák, M. - Litoš, J. - Stančík, V., - Rose, D.
    In: Železniční mosty a tunely 2017, sborník příspěvků. Praha: SUDOP Praha a.s., 2017. p. 9-16. ISBN 978-80-906789-0-3.
    2017
  • The dependence of the shrinkage of the cement composite with fine ground recycled concrete on its microstructure

    • Hrůza, J. - Topič, J., - Prošek, Z.
    In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 103-108. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Mechanical Properties of the Cement Paste with Fine Ground Recycled Concrete Depending on the Microstructure

    • Hrůza, J. - Topič, J., - Prošek, Z.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 22-27. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Comparing Nano And Macroindentation In Search Of Microfibril Angle In Spruce

    • Kucíková, L. - Vorel, J. - Hrbek, V. - Němeček, J., - Šejnoha, M.
    The International Journal of Computational Methods and Experimental Measurements. 2017, 5(2), 135-143. ISSN 2046-0546.
    2017
  • Flexural and Compressive Strength of the Cement Paste with Recycled Concrete Powder

    • Topič, J. - Fládr, J., - Prošek, Z.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 65-69. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Quasicontinuum Method Combined with Anisotropic Microplane Model

    • Mikeš, K. - Jirásek, M.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 142-147. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • The Effect of Micronized Waste Marble Powder as Partial Replacement for Cement on Resulting Mechanical Properties of Cement Pastes

    • Prošek, Z. - Šeps, K., - Topič, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 54-58. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Experiments on Wall Panels with One-sided Board Sheathing for Timber Structures

    • Celler, J. - Dolejš, J., - Hlavatá, V.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 3-8. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Microfiber Angle and its Effect on Wood Cell Behavior

    • Hlavatá, V. - Kuklík, P. - Celler, J., - Vaněrek, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 88-96. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Locking Removal Techniques for the Isogeometric Formulation of Curved Beams

    • Dvořáková, E. - Patzák, B.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 109-114. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Evaluation of Different Approaches to Solution of the Direct Solution of Large, Sparse Systems of Linear Equations

    • Bošanský, M. - Patzák, B.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 97-101. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Advanced Materials Research

    • Bošanský, M. ed.
    Curich: Trans Tech Publications, 2017.
    2017
  • Contemporary Materials and Technologies in Civil Engineering

    • Ryparová, P. ed. - Tesárek, P. ed.
    Praha, 2016-06-15. Curich: Trans Tech Publications, 2017. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
    2017
  • Adaptive Boundaries of Wang Tiles for Heterogeneous Material Modelling

    • Šedlbauer, D.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 159-166. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Comparison of Semidefinite Solvers for Topology Optimization of Cantilever Trusses Subject to Fundamental Eigenvalue Constraint

    • Tyburec, M. - Zeman, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 172-177. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Synthesized Fields Fluctuations by Means of Wang Tiles and Local Tilings

    • Zrůbek, L. - Kučerová, A., - Novák, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 178-183. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Microstructure-Based Evolution Of Compressive Strength Of Blended Mortars: A Continuum Micromechanics Approach

    • Hlobil, M.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 121-127. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Galerkin-Eshelby Meshless Approach to Multiple Inclusion Problem

    • Šulc, S. - Novák, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 167-171. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Parameter Study on Subset Simulation for Reliability Assessment

    • Hlobilová, A. - Lepš, M.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 128-135. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Wang Tiling Based Enrichment Functions for Extended Finite Element Method

    • Doškář, M. - Novák, J., - Zeman, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 102-108. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Künzel Model and Boundary Inverse Problem

    • Havelka, J. - Sýkora, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 115-120. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Surrogate Based Evaluation of the Design of Experiments

    • Myšáková, E. - Lepš, M.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 148-152. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Bayesian Updating of Aleatory Uncertainties in Heterogeneous Materials

    • Janouchová, E. - Kučerová, A., - Sýkora, J.
    In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 136-141. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Modern Methods of Experimental and Computational Investigations in Area of Construction II

    • Padevět, P. ed.
    Praha, 2016-09-22. Pfaffikon: Trans Tech Publications Inc., 2017. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
    2017
  • Micromechanics-based simulations of compressive and tensile testing on lime-based mortars

    • Nežerka, V. - Zeman, J., - Němeček, J.
    Mechanics of Materials. 2017, 105 49-60. ISSN 0167-6636.
    2017
  • Relationship between Compressive Strength and Young´s Modulus of Cement Paste with Recycled Concrete Powder

    • Topič, J. - Trejbal, J. - Plachý, T., - Prošek, Z.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 254-259. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Mechanical Properties of Cement Composites Reinforced by Carbon Microfibers: Compressive and Bending Strength

    • Tesárek, P. - Holub, P. - Havrda, J. - Fládr, J. - Prošek, Z. - Trejbal, J., - Plachý, T.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 351-356. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Influence of Waste Crushed Limestone and Waste Micronized Marble Powder on Mechanical Properties of Cement Composite

    • Prošek, Z. - Topič, J. - Šeps, K., - Tesárek, P.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 222-227. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Effect of Microfillers on Selected Destructive and Nondestructive Mechanical Properties of Cement Mortars: Different Types of Recycled Materials

    • Plachý, T. - Tesárek, P. - Hlubocký, L. - Hrůza, J. - Trejbal, J., - Prošek, Z.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 195-200. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Estimation of thermophysical parameters revisited from the point of view of nonlinear regression with random parameters

    • Jarušková, D. - Kučerová, A.
    International Journal of Heat and Mass Transfer. 2017, 106 135-141. ISSN 0017-9310.
    2017
  • Fiber Reinforced Fly Ash Concrete and Extreme Fires

    • Brouček, M. - Šejnoha, M., - Reiterman, P.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 12-17. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017
  • Long-Term Development of Strength of Cement Paste with Fly Ash

    • Zobal, O. - Padevět, P.
    In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 151-156. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
    2017

— K132 FSv CVUT —
(C) 1998-2021 by Mech, powered by Apache, Debian & Dell