Milan Jirasek
Advanced course on

Modeling of Localized Inelastic Deformation

taught by Milan Jirásek

in Prague, Czech Republic, on 18-22 September 2006

How to get from the metro station Dejvicka to the lecture room:

This is the terminal bus station at which you will get off the bus No. 107 or 147 when coming from Pension JaS. If you arrive by subway (terminal station "Dejvicka" on line A), leave the platform using the exit with the fixed staircase and then turn left to reach the place depicted here.

From the bus stop you can already see the first buildings of the CTU campus.

Walk through the park ...

... and continue along the "Technicka" street straight ahead.

At the end of the street you will see in front of you the interconnected buildings of the Faculty of Civil Engineering (left) and Faculty of Architecture (right).

Enter through the left main gate ...

... and in the main lobby ...

... take this staircase on your left (walk carefully, it is quite steep).

At the top of this spectacular staircase ...

... take a smaller staircase in front of you ...

.. and climb up one more level. Then take the right hallway (i.e., when coming from the staircase make a U-turn to the left).

At the very end of this long hallway, on the right side, you will find the coffee room B366 in which we will meet before the lectures. If you arrive after 9 a.m., please go directly to the lecture room A35, which is in another part of the bulding, so you need to take a right turn just after you enter the lobby through the main gate, find a staircase that goes down and get to the floor at "level zero".