Selected Published Papers

  1. K. Hájková, V. Šmilauer, L. Jendele, J. Červenka: Prediction of reinforcement corrosion due to chloride ingress and its effects on serviceability. Engineering Structures 2018, 174 768-777. ISSN 0141-0296.
  2. A. Jędrzejewska, F. Benboudjema, L. Lacarrière, M. Azenha, D. Schlicke,S. Dal Pont, A. Delaplace, J. Granja, K. Hájková, P. J. Heinrich, G. Sciumè, E. Strieder, E. Stierschneider, V. Šmilauer, V. Troyan: COST TU1404 Benchmark on macroscopic modelling of concrete and concrete structures at early age: proof-of-concept stage. Construction and Building Materials. 2018, 2018(174), 173-189. ISSN 0950-0618.
  3. P. Hlaváček, R. Šulc, V. Šmilauer, C. Rossler, R. Snop: Ternary binder made of CFBC fly ash, conventional fly ash, and calcium hydroxide: Phase and strength evolution. Cement and Concrete Composites. 2018, 90, 100-107, ISSN 0958-9465.
  4. U. Haider, Z. Bittnar, L. Kopecký, V. Šmilauer, J. Pokorný, M. Záleská, Z. Prošek, V. Hrbek: Determining the role of individual fly ash particles in influencing the variation in the overall physical, morphological, and chemical properties of fly ash. Acta Polytechnica. 2016, 56(4), 265-282, ISSN 1210-2709.
  5. J. Němeček, V. Králík, V. Šmilauer, L. Polívka, A. Jäger: Tensile strength of hydrated cement paste phases assessed by microbending tests and nanoindentation. Cement and Concrete Composites. 2016, vol. 73, p. 164-173.
  6. M. Hlobil, V. Šmilauer, G. Chanvillard: Micromechanical multiscale fracture model for compressive strength of blended cement pastes. Cement and Concrete Research. 2016, vol. 83, p. 188-202. ISSN 0008-8846
  7. W. Leal Da Silva, V. Šmilauer: Nomogram for Maximum Temperature of Mass Concrete. Concrete International. 2015, vol. 37, no. 5, p. 30-36. ISSN 0162-4075.
  8. O. Zobal, V. Šmilauer, W. Leal Da Silva, B. Mužíková, P. Padevět: Influence of fly ashes on the selected properties of cement binders. BETON-technologie, konstrukce, sanace. 2015, vol. 15, no. 2, p. 42-47. ISSN 1213-3116. (in Czech).
  9. W. Leal Da Silva, V. Šmilauer: Fuzzy affinity hydration model. Journal of Intelligent and Fuzzy Systems. 2015, vol. 28, no. 1, p. 127-139. ISSN 1064-1246.
  10. W. da Silva, V. Šmilauer, P. Štemberk: Upscaling semi-adiabatic measurements for simulating temperature evolution of mass concrete structures. Materials and Structures. 2015, vol. 48, no. 4, p. 188-197. ISSN 0862-5468.
  11. P. Hlaváček, V. Šmilauer, F. Škvára, R. Šulc, L. Kopecký: Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties. Journal of the European Ceramic Society. 2015, vol. 35, no. 2, p. 703-709. ISSN 0955-2219.
  12. V. Šmilauer, O. Babchenko, Š. Potocký, A. Kromka: Hydration of plasma-treated alumosilicate binders. Acta Polytechnica. 2014, vol. 54, no. 5, p. 348-351. ISSN 1210-2709.
  13. V. Červenka, J. Červenka, L. Jendele, V. Šmilauer, V.: ATENA simulation of crack propagation in CONCRACK benchmark. European Journal of Environmental and Civil Engineering. 2014, vol. 18, no. 7, p. 828-844. ISSN 1964-8189.
  14. L. Jendele, V. Šmilauer, J. Červenka: Multiscale hydro-thermo-mechanical model for early-age and mature concrete structures. Advances in Engineering Software. 2014, vol. 72, p. 134-146. ISSN 0965-9978.
  15. V. Šmilauer, O. Zobal, Z. Bittnar, R. Hela, R. Snop, P. Donát: Využití úletových popílků pro betonáž masivních konstrukcí. BETON-technologie, konstrukce, sanace. 2014, roč. 14, č. 2, s. 60-65. ISSN 1213-3116.
  16. O. Zobal, L. Kopecký, P. Padevět, V. Šmilauer, Z. Bittnar: Analýza betonu z tělesa přehrady Orlík po padesáti letech. BETON-technologie, konstrukce, sanace. 2014, roč. 14, č. 2, s. 19-25. ISSN 1213-3116.
  17. V. Šmilauer, P. Hlaváček, P. Padevět: Micromechanical Analysis of Cement Paste with Carbon Nanotubes. Acta Polytechnica. 2012, vol. 52, no. 6, p. 35-41. ISSN 1210-2709.
  18. F. Škvára, V. Šmilauer, P. Hlaváček, L. Kopecký, Z. Cílová: A weak alkali bond in (N, K)-A-S-H gels: evidence from leaching and modeling. Ceramics - Silikáty. 2012, vol. 56, no. 4, p. 374-382. ISSN 0862-5468.
  19. J. Vorel, V. Šmilauer, Z. Bittnar: Multiscale Simulations of Concrete Mechanical Tests. Journal of Computational and Applied Mathematics. 2012, vol. 236, no. 18, p. 4882-4892. ISSN 0377-0427.
  20. V. Šmilauer, J. L. Vítek, B. Patzák, Z. Bittnar: Optimalizace chlazení oblouku Oparenského mostu. Cooling optimization in Oparno bridge's arch. Časopis Beton TKS. 2011, vol. 11, no. 4, p. 62-65.
  21. R. Šulc, T. Strnad, F. Škvára, P. Svoboda, Z. Bittnar, V. Šmilauer, L. Kopecký: Concrete Based on Fly Ash Alumosilicate Polymers. Journal of Environmental Science and Engineering. 2011, vol. 5, no. 6, p. 728-735.
  22. V. Šmilauer, P. Hlaváček, F. Škvára, R. Šulc, L. Kopecký, J. Němeček: Micromechanical multiscale model for alkali activation of fly ash and metakaolin. Journal of Materials Science. 2011, vol. 46, no. 20, p. 6545-6555.
  23. V. Šmilauer, C.G. Hoover, Z.P. Bažant, F.C. Caner, A.M. Waas, K.W. Shahwan: Multiscale simulation of fracture of braided composites via repetitive unit cells. Engineering Fracture Mechanics. 2011, vol. 78, no. 6, p. 901-918. ISSN 0013-7944.
  24. J. Němeček, V. Šmilauer, L. Kopecký: Nanoindentation characteristics of alkali-activated aluminosilicate materials. Cement and Concrete Composites. 2011, vol. 33, no. 2, p. 163-170. ISSN 0958-9465.
  25. V. Šmilauer, Z.P. Bažant: Identification of viscoelastic C-S-H behavior in mature cement paste by FFT-based homogenization method. Cement and Concrete Research. 2010, vol. 40, no. 2, p. 197-207. ISSN 0008-8846.
  26. F. Škvára, L. Kopecký, V. Šmilauer: Aluminosilicate polymers - influence of elevated temperatures, efflorescence. Ceramics - Silikáty. 2009, vol. 53, no. 4, p. 276-282. ISSN 0862-5468.
  27. V. Šmilauer, T. Krejčí: Multiscale Model for Temperature Distribution in Hydrating Concrete. International Journal for Multiscale Computational Engineering. 2009, vol. 7, no. 2, p. 135-151.ISSN 1543-1649.
  28. F. Škvára, L. Kopecký, V. Šmilauer, Z. Bittnar: Material and structural characterization of alkali activated low-calcium brown coal fly ash. Journal of Hazardous Materials. 2009, vol. 168, no. 2-3,p. 711-720. ISSN 0304-3894.
  29. F. Škvára, P. Svoboda, J. Doležal, Z. Bittnar, V. Šmilauer, et al.: Geopolymer Concrete - An Ancient Material Too? Ceramics-Silikáty. 2008, vol. 52, no. 4, p. 296-298. ISSN 0862-5468.
  30. V. Šmilauer, Z. Bittnar: Elastic Properties of Concrete from Multiscale Homogenization. BETON-technologie,konstrukce, sanace. 2006, roč. 6, č. 4, s. 42-46. ISSN 1213-3116. (in Czech).
  31. V. Šmilauer, Z. Bittnar: Microstructure-based Micromechanical Prediction of Elastic Properties in Hydrating Cement Paste. Cement and Concrete Research. 2006, vol. 36, no. 9, p. 1708-1718. ISSN 0008-8846.

Posters

  1. Alkali-activated Fly Ash: Integrated Research on an Alternative Aluminosilicate Binder

PhD Thesis

  1. Šmilauer, V.: Elastic properties of hydrating cement paste determined from hydration models, Czech Technical University in Prague, Faculty of Civil Engineering. 2006.

MSc Dissertation

  1. M. Kubík: Modelování vývinu hydratačního tepla na betonových konstrukcích, Czech Technical University in Prague, Faculty of Civil Engineering, 2007. (in Czech).
  2. P. Hlaváček: Micromechanical analysis of alkali activated fly ashes, Czech Technical University in Prague, Faculty of Civil Engineering, 2010.